DOS Flash Utility

Perform the following steps to use the DOS Flash Utility:

1.Press F2 during boot to enter the Setup Menu.

2.Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.

3.Execute the FLASH.BAT batch file to update BIOS. The flash process begins as shown.

4.In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.

40

Chapter 2

Page 50
Image 50
Acer 4736G, 4736Z manual DOS Flash Utility