Replacing the Hard Disk Drive Module

1. Place the HDD carrier on the HDD.

2. Replace the four securing screws (two each side).

3.Place the HDD Module in the HDD bay as shown and slide it in the direction of the arrow to connect the interface.

Replacing the DIMM Modules

NOTE: To replace DIMM Module 2, first remove DIMM Module 1. In this procedure, only DIMM Module 1 is shown.

1.Insert the DIMM Module flush with the connector and press down to lock in place.

136

Chapter 3

Page 146
Image 146
Acer 4736G, 4736Z manual Replacing the Hard Disk Drive Module, Replacing the Dimm Modules, Place the HDD carrier on the HDD