FM Receiver, Audio and GPS1 Tests
NOTE:
•Take care not to damage the casing when putting the handset on the test fixture.
1.Plug in the FM Receiver test cable into the handset USB port and press FM Rx test. If the test shows Pass, the handset passed.
2.If the test is Pass, put the handset in the tray and click GPS
for GPS testing. If the test shows Pass, the handset passed.
3. Put the handset in the Audio Test fixture and click 1K Hz to test Audio functions.
4. Check if the value is less than the limited value. If so, the device passed.
2 | Chapter 4 |
