32

ACER G24

6. Firmware Upgrade Process (continued)

Go to cover page

Press [Device] button to select the WP pin pull to high during ISP

Press [Read] button.

1.Press Read folder to browse firmware image. 2.The position according to where the firmware be put

Press [Run] button and waiting for firmware upgrade

completed .The screen will show “PASS”

Check firmware version

Turn off the power,then press force on “ POWER ” and “ E ” button at the same time then press on “ MENU ”button to enter factory mode

Note: Please pay attention ,Don’t change any parameter which is measured by precise machine before shipping out

1

2

Press [Auto] button

When you writing F/W face on interrupting that cause monitor shut down .

You can unplug AC power then press “AUTO”button and plug AC power at the same time to solve this problem then re-write F/W again.

Page 33
Image 33
Acer MB243WABNS service manual Go to cover