ProductAnouncement:
Thisproduct is certificated to meet RoHS Directive and
Lead-Freeproduced definition. Using approved critical
componentsonly is recommended when the situation
toreplace defective parts. Vender assumes no liability
expressor implied, arising out of any unauthorized
modificationof design or replacing non-RoHS parts.
Serviceproviders assume all liability.
QualifiedRepairability:
Properservice and repair is important to the safe,
reliableoperation of all series products. The service
providersrecommended by vender should being
awareof notices listed in this service manual in order
tominimize the risk of personal injury when perform
serviceprocedures. Furtermore, the possibile existed
improperrepairing method may damage equipment or
products.It is recommended that service engineers
shouldhave repairing knowledge, experience, as well
asappropriate product training per new model before
performingthe service procedures.
NOTICE:
Toavoid electrical shocks, the products should be
connectto an authorized power cord, and turn off the
masterpower switch each time before removing the
ACpower cord.
Toprevent the product away from water or explosed
inextremely high humility environment.
Toensure the continued reliability of this product,
useonly original manufacturer s specified parts.
Toensure following safty repairing behavior,put the
replacedpart on the components side of PWBA, not
solderside.
!
!
!
!
Toensure using a proper screwdriver,follow the
torqueand force listed in assembly and disassembly
proceduresto screw and unscrew screws.
!
UsingLead-Free solder to well mounted the parts.!
!Thefusion point of Lead-Free solder requested in the
degreeof 220 C.°
ImportantSafety Notice
Go to cover page
1
ACERG24