
123
Note: Look for an imprint that says “front” or “rear” on the mounting bracket. Install the mounting bracket on the appropriate side; otherwise, it will not fit correctly into the rack.
gSecure it with three M4xL8 screws with nut and washer as shown below. Slide and adjust the inner piece of the mounting rail to gain access to the screw holes. The position of the mounting bracket on this end is fixed.
hExtend the inner sliding piece of the mounting rail until you can see the screw holes on the other end. Attach the mounting bracket to the rear end and secure it with two M4xL8 screws. The mounting rail on this end is adjustable.