86 |
| 5 Setup utility |
|
|
|
Parameter | Description | Option |
|
|
|
Dial Out Retry | This parameter lets you specify the maxi- |
Times | mum number of times the RDM server must |
| retry to connect to the RDM manager |
| station once the server fails and RDM is |
| activated. If the server has completed the |
| specified number of tries and the connec- |
| tion still fails, the server bypasses RDM and |
| goes into normal mode. |
2
4
8
Infinite
Modem Initial | Some modems require specific commands | User input |
Command | for initialization. This parameter allows you |
|
| to specify the required command to enable |
|
| your system to support special types of |
|
| modems. If you do not specify any com- |
|
| mand, BIOS uses the default method to ini- |
|
| tialize the modema. |
|
Emergency Management
RDM Work | When detecting system failure, the RDM |
Mode | module will take some actions according to |
| the active mode. |
| Waiting: Page and wait for the RDM Station |
| to call in |
| Reboot: Page, then reboot |
| Disabled: No action |
| Note: If Waiting is selected, a password |
| consisting of at least three alphanumeric |
| characters must be set. |
Disabled
Waiting
Reboot
Waiting Mode | Prevents unauthorized access to the server | User input |
Password |
|
|
Paging Times | Allows you to set the number of times that |
| the RDM module must dial when the server |
| fails or hangs |
1
2
4
8
Paging No. | Allows you to set the pager number that | User input |
| the RDM module must dial when the server |
|
| fails or hangs |
|
a. Specify an initialization command only when you receive a Modem Initial Command Fail error message. Otherwise, leave this parameter blank.
