71

Power Management

The Power Management menu allows you to configure the system’s

power management feature.

The following screen shows the parameters on the Power

Management screen:

Parameter Description Option
Power
Management
Mode
Allows you to reduce power consump-
tion. When this parameter is set to
Enabled, you can configure the IDE hard
disk and system timers. Setting it to Dis-
abled deactivates the power-management
feature and its timers.
Enabled
Disabled
IDE Hard Disk
Standby Timer
Allows the hard disk to enter standby
mode after inactivity of 1 to 15 minutes,
depending on your setting. When you
access the hard disk again, allow 3 to 5 sec-
onds (depending on the hard disk) for the
disk to return to normal speed. Set this
parameter to Off if your hard disk does not
support this function.
Off
1 minute
15 minutes
aar500.book Page 71 Thursday,September 20,2001 11:06 AM