85
Parameter | Description | Option |
|
|
|
Hidden | If you want the hidden partition to become |
Partition | accessible, set this parameter to Enabled. |
| When enabled, the server boots to the hid- |
| den partition. |
Disabled
Enabled
Communica- This parameter specifies the parity, stop
tion Protocol bits, and data length for the COM port to use for RDM connection. This is fixed at N (none), 8, 1 setting and is
N
8
1
COM Port Baud | This parameter lets you set the transfer rate |
Rate | of the COM port for RDM connection. The |
| parameter setting depends on your modem |
| specification; therefore, before you change |
| the setting of this parameter, check the |
| documentation that came with your |
| modem. |
9600
57600
Detect Tone | When enabled, RDM first checks for the |
| existence of a telephone tone before it dials |
| out. |
| When disabled, RDM proceeds with the |
| dialing process without checking for a |
| telephone tone. |
Enabled
Disabled
Remote | This parameter allows you to set the phone User input |
Console Phone | number of the RDM manager station that |
No. | the RDM module must dial once RDM is |
| activated and the Remote Console is |
| enabled. To set, simply highlight the |
| parameter and enter the Remote Console |
| phone number. |
| If the remote console phone number is |
| using an (X) line, then you must enter six |
| commas (,) after the phone number and |
| before the extension number, if any. When |
| entering the extension number, we recom- |
| mend that you insert a comma after each |
| number. The commas specify delay. |
| If this parameter is left blank, the Remote |
| Console calling function is disregarded. |
|
|
