Acer R500 manual Standby, Power off

72 5 Setup utility

Parameter Description Option

System Sleep	This parameter sets the system to the
Timer	lowest power-saving mode after a speci-
	fied period of inactivity. Any keyboard or
	mouse action or any activity detected from
	the IRQ channels resumes system opera-
	tion.

Off

On

Sleep Mode Lets you specify the power-saving mode that the system will enter after a specified period of inactivity.

This parameter becomes configurable only if the System Sleep Timer is on. Any key- board or mouse action, or any enabled monitored activities occurring through the IRQ channels resume system operation.

Standby

Suspend

Power Switch	When set to Power off, the system auto-
< 4 sec.	matically turns off when the power switch
	is pressed for less than 4 seconds. When
	set to Suspend, the system enters the sus-
	pend mode when the power switch is
	pressed for less than 4 seconds.

Power off

Suspend

System Wake-	The system wake-up event allows the sys-
up Event	tem to resume operation when the modem
	ring indicator is enabled.
Modem Ring	When Enabled, any fax/modem activity	Enabled
Indicator	wakes up the system from suspend mode.	Disabled
PCI Power	Enables or disabled the PCI power	Enabled
Management	managment function	Disabled
RTC Alarm	Allows you to set a certain time on a cer-	Disabled
	tain day to wake-up your system from sus-	Enabled
	pend mode.
Resume	If RTC alarm is enabled, the system will	User input
Day	resume operation on the day indicated
	here.
Resume	If RTC alarm is enabled, the system will	User input
Time	resume operation at the time indicated
	here.