6.2Realtek F/W Configuration:
Step-1Launch the utility of “ ”DebugTool_V6.2.exe
Step-3SelectISP type: Serial Flash
SelectISP icon.
Step-4Follow up the red square indication
SelectP-flash and Auto
ConnectVGA
cablebetween
monitorand kit
ConnectUSB
andVGA
cablebetween
PCand kit
Step-2Select “USB”
Ifit shows “No USB Device”, there is a problems with
communication.you should confirm your USB device
whetherbe detected by your PC device management or
reconnectthe USB cable again.
6.1Hardware Configuration
35
Go to cover page
6.Firmware Upgrade Process
ACERH233H