f.Item page status
Status Displaytype
Non-focus
Itemfocused
Itemselected
Thedescription for control function
Key Functiondescription
Power Poweroffthe monitor
<Movingthefocusup
>Movingthefocusdown
Menu
Entertot he item page
1.It has no function at the information
page.
Auto Exit the OSD menu
e Triggertheacer eColor Management
Key Functiondescription
Power Power off the monitor
<Movingthefocusup
>Movingthefocusdown
Menu Select function item for a djustment
Auto Exitfrom the item page to icon place
e Trigger the acer eColor Management
Key Functiondescription
Power Poweroff the monitor
< Decreasethesetting value for target item
> Increasethesetting value for target item
Menu Nofunction
Auto Exit from item selected status
e Triggertheacer eColor Management
Acer eColor management
a. Display acer eColor Management OSD when user press
“e” button on the front bezel or trigger this function in OSD
menu/picture page.
b. Layout as following figure 1-8
c. The definition of color & size for the acer eColor management
OSD
d. Icons introduction
Scenario mode:
Mode Contrast(OSD) Brightness (OSD)
Usermode (Userdefined) (User defined)
Textmode 50(slope 1.0) 44(61%)
Standardmode 50 (slope 1.0) 77(85%)
Graphicsmode 60 (slope 1.04) 97 (98%)
Moviemode 56(slope 1.025) 77(85%)
Note: The contrast/brightness value of modes should be
adjusted by requirement.
Operation method:
Step 1: Press “e” key to initial scenario mode.
Step 2: Press “>” or “<” key to select the mode you want (not
cyclic).
Step 3: If user has NO action after Step 2, OSD will disappear
after 10 sec and do “auto scan” (mode keep in original
one, no change).
If user press “e” key after Step 2, it means user confirm
the chosen mode and monitor will do “auto scan” as
well.
2.OSD Manu (continued)
9
Go to cover page
ACERH233H