Connecting | 4 |
the Gateway |
The instructions that follow parallel closely with the steps contained in the Installation Buddy, which provides a visual guide to setting up the Gateway. It is recommended that the user run the Installation Buddy first, before attempting any other procedures.
To set up the Gateway, the user must first connect it to a computer via USB or Ethernet cable. After connecting this first computer, other computers can be added to the home network via USB, Ethernet, or wirelessly (see “Connecting Additional Computers on page xx).
Connecting the Power and DSL Cable
1.Get the DSL Gateway from your DSL Quick Start Kit and take it out of the bag.
2.Get the Power Cord out of the Black Bag and plug the smaller end of the Power Cord into the Black Port located on the back of the DSL Gateway.
3
