Actron 9640 user manual Read Temporary Codes, Eng, Trans, Evap

Chrysler Diagnostics

Use the UP/DOWN arrow keys to scroll through the codes. Write down the codes for reference or print them later.

ENG: 31/P0443

EVAP Purge Solenoid

Circuit

~

The DTCs are categorized by ENG (engine) or TRANS (transmission). The Chrysler MIL code (3-digit) and SAE code (5-digit) follow on the first line.

ENG:	31/P0443	TRANS:	18/P1792
EVAP	Purge Solenoid	Battery		]
Circuit		Disconnected		[
	~	(In Last	50	Cycles) ~

There may be times where only one or both display. Dashes display if the DTC type does not exist.

ENG:	7/----	ENG: ---/P0010
Boost	Limit	Camshaft	Position	]
Exceeded		Actuator	A - Bank 1[
	~	Circuit Malfunction		~

Note the codes and press BACK to return to the Chrysler Functions list.

READ TEMPORARY CODES

✓For JTEC and SBEC III Equipped Vehicles Only.

	The Read Temp Codes (Read Temporary Codes) function is used on vehicles
	equipped with Jeep and Truck Engine Controllers (JTEC) and SBEC version III
	modules. The function enables the tool to retrieve and display all DTCs that
7	failed one trip but did not turn on the MIL light. If the vehicle does not support
	this function, then the tool will not display it.

Select Read Temp Codes from the Chrysler Functions list and press

ENTER.

Chrysler	Functions	?
1)Read	Codes
` 2)Read	Temp Codes [
3)Erase	Codes	~

!CAUTION

Keep hands and Tools away from fan and engine during test.

Next, turn the ignition key On-Engine can be Off or Running.

Once the tool has completed reading the temporary DTC s, one of two screens display:

System Pass:	Use S To View Code.
No Faults Detected.	Write Down Codes
	For Reference
~	~

7 – 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •