Actron 9640 user manual Erase Codes, Esc

GM Historic (OBD I) Diagnostics

Select Read Codes from the GM Function List and press ENTER. The tool will retrieve the DTCs.

GM Function List		?
` 1)Read	Codes
2)Erase	Codes	[
3)View	Data	~

One of two screens displays: If the diagnostic checks are working correctly and no DTCs have been stored in vehicle’s memory, a SYSTEM PASS message displays. If not, the tool displays a screen indicating the number DTCs.

System Pass:

No Faults Detected.

~

Use the UP/DOWN arrow keys to scroll through the codes. Note the codes and press FUNC to return to the GM

Function List.

5

Erase Codes

Codes Found: 1

Use Q To View Codes

Write Down Codes
For Reference	~

Current Code P0325

Ign	System	Problem
Elec	Spark	Control
ESC	Failure	~

The Erase Codes function deletes the DTCs from the vehicle’s computer memory. Perform this function with KOEO or KOER. This function should be performed only after the systems have been checked completely and DTCs have been documented.

After servicing the vehicle, erase the stored DTCs, perform a road test, and then verify no new codes have been stored. If DTCs return, the problem has not been corrected or other faults are present.

✓Some codes can only be removed by repairing the faults that caused them. Therefore, these codes will remain in the vehicle’s memory until the condition is repaired.

✓Not all trouble codes can be automatically erased using the scan tool. Some vehicles require a manual erasing procedure. If possible, the tool performs the appropriate Erase Codes procedure for your vehicle.

Select Erase Codes and press the ENTER key.

GM Function List		?
1)Read	Codes
` 2)Erase	Codes	[
3)View	Data	~

5 – 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •