• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 – 11
Chrysler Diagnostics
7
Select Reset EMR Lamp from the
Chrysler Functions list and press
ENTER
.
Turn ignition key On, but do not start
engine.
Press
ENTER
to reset the EMR lamp.
Press the
FUNC
or
BACK
key to return
to the Chrysler Functions list.
SET BASIC TIME
The Set Basic Time function is used when checking basic timing. This feature
suspends spark scatter at idle. Other tests, such as Sensor Test, can be
performed concurrently with this mode.
Select Set Basic Time from the
Chrysler Functions list and press
ENTER
.
Keep hands and Tools away from fan and engine during
test.
Connect a strobe timing light and perform ALL steps as prompted by the tool
screens as follows:
1) Set the Parking Brake.
2) Transmission in park (P) or neutral (N).
3) Turn A/C Off.
4) Start engine and let idle until hot.
5) Turn ignition key Off.
6) Wait 10 seconds. Start engine and let idle.
7) If vehicle has a manual transmission, release clutch.
Press
ENTER
and then select a request
mode. Depending on the vehicle, some
Request Modes may not be available.
Chrysler Functions ?
9)Sensor Test
]
10)Controller Info
[
`11)Reset EMR Lamp
~
EMR Lamp Is Reset.
~
Chrysler Functions ?
`12)Set Basic Time
]
13)Review Data
[
14)Print Data
~
!
CAUTION
Select Request Mode
1)Abolish Request
2)Initiate Timing
[
`
3)Set Sync Mode
~