ADC H2TU-C-231 manual 26

ProvisioningLTPH-UM-1109-01, Issue 1

Table 5. H2TU-C-231 List 2 Standard Config Menu Options (Continued)

Standard Config	Front-Panel
	Display	Selection	Description
Menu Options
	Code
H2TU-R Line	RLBO		Sets the DS1 receive level output toward the Customer Interface (CI). H2TU-R
Buildout			Line Buildout can only be set through the maintenance screens.
		0 dB	Sets the DS1 RLBO level toward the CI to 0 dB.
		-7.5 dB	Sets the DS1 RLBO level toward the CI to -7.5 dB.
		-15.0 dB	Sets the DS1 RLBO level toward the CI to -15.0 dB.
Alarm Pattern	ALMP	AIS	Enables the HiGain HDSL2 system to output an AIS payload at its DS1 ports
See “Alarm			for LOSW and DS1 LOS. See Figure 26 on page 42 for LOS/AIS response
			priorities.
Pattern (ALMP)
Option” on		LOS	Enables the HiGain HDSL2 system to output an LOS condition at its DS1 ports
page 20.			for LOSW and DS1 LOS.
H2TU-R TLOS	TLOS	ENA	Enables a logic loopback at the H2TU-R when an LOS occurs at its DS1 input.
Loopback			See Figure 26 on page 42 for LOS/AIS response priorities.
		DIS	Disables Transmit Loss of Signal (TLOS) logic loopback.
Network	NLBP	AIS	Enables the H2TU-R to transmit an AIS towards CI for any network loopback.
Loopback Pattern			See Figure 26 on page 42 for LOS/AIS response priorities.
		LOS	Enables the H2TU-R to transmit an LOS towards CI for any network loopback.
Power Back Off -	PBOC	DEF	Configures the power output levels of the H2TU-R customer unit toward the
Customer			network to comply with the Default template as defined in Section 6.1.4.2 of
See “Power Back			ANSI T1/E1.4.
Off (PBON and		ENH	Configures the power output levels of the H2TU-R customer unit toward the
PBOC) Options”			network to comply with the Enhanced template as defined in Section 6.1.4.2
on page 20.			of ANSI T1/E1.4.
Power Back Off -	PBON	DEF	Configures the power output levels of the H2TU-C-231 network unit toward
Network			the customer to comply with the Default template as defined in Section
See “Power Back			6.1.4.2 of ANSI T1/E1.4.
Off (PBON and		ENH	Configures the power output levels of the H2TU-C-231 network unit toward
PBOC) Options”			the customer to comply with the Enhanced template as defined in Section
on page 20.			6.1.4.2 of ANSI T1/E1.4.

Table 6. H2TU-C-231 List 2 ADC Config Menu Options

ADC Config Menu	Front Panel
	Display	Selection	Description
Options
	Code
Line Power Feed	PWRF	OFF	Disables powering to the HDSL2 pair.
		ON	Keeps the HDSL2 line voltage at nominal -180 Vdc.
Remote	RTPV	ENA	Enables remote provisioning.
Provisioning		DIS	Disables remote provisioning.
Bipolar Violation	BPVT	ENA	Enables BPVs and HDSL2 CRC errors at the DS1 input to be converted into
Transparency			DS1 BPVs at the DS1 output at the distant end. This makes HiGain HDSL2
See “Bipolar			transparent to BPVs.
Violation		DIS	Disables BPV Transparency.
Transparency
(BPVT) Option”
on page 20.
			Continued

18 January 9, 2002 H2TU-C-231 List 2