API Guide
601355 Rev A Error Codes B-13
Error Codes
127 VSE_VOLERR_INVALID_RPC_PROC
_NUMBER Invalid RPC procedure number.
128 VSE_VOLERR_INVALID_RPC_
PROTOCOL Invalid RPC protocol.
129 VSE_VOLERR_LOCK_CROSSES_
ARCHIVES Lock crosses archives.
Only drives in the same archive can be
locked with a single lock command.
130 VSE_VOLERR_SOFTWARE_NOT_
READY Software not ready.
VolServ is not ready to process
requests. It is still initializing.
131 VSE_VOLERR_NOT_ACCEPTING_
COMMANDS VolServ not accepting commands.
VolServ is in single-user mode (i.e., it is
not accepting commands through the
client interface).
132 VSE_VOLERR_COMMAND_NOT_
ALLOWED Command not allowed.
The specified command is not allowed
over this interface. The system
administrator controls which commands
are allowed over each interface.
133 VSE_VOLERR_INVALID_LOCK_
COUNT Invalid lock count.
Drive lock count is not a positive
non-zero number.
134 VSE_VOLERR_NO_AVAILABLE_BINS No available bins.
135 VSE_VOLERR_INVALID_MODE Invalid mode.
The specified mode is out of range.
136 VSE_VOLERR_COMMAND_IN_
UNKNOWN_STATE Command terminated in unknown state.
137 VSE_VOLERR_MANUFACTURER_
MISSING Manufacturer not specified.
A batch identifier was specified without
the manufacturer name (none or both
are required).
Code Definition Description