API Guide
601355 Rev A API Functions 2-499
Functions
VSCMD_Audit_SetDefaults VSCMD_Audit_SetDefaults sets command-level default
parameters for Audit commands.
Two levels of default parameter settings are used in the API
software—global defaults and command-specific defaults.
• Global defaults for all commands are initialized at startup
and can be set or retrieved using VS_Global_SetFields
and VS_Global_GetFields function calls.
• Command-specific parameter defaults for Audit commands
are set with VSCMD_Audit_SetDefaults. If
command-specific defaults are set for Audit commands,
they override the global defaults for all commands.
Synopsis VST_BOOLEAN VSCMD_Audit_SetDefaults
(
“…”,
VSID_ENDFIELD)
Arguments •“…” = Variable length argument list consisting of pairs of
Arguments. Each pair of Arguments consists of a parameter
identifier, followed by the value to be used as a command
default value for the field. The valid parameter identifiers
and types for this function are shown in the following
"Parameters" paragraph.
Tip
To override a default (global or command-specific)
parameter value for a specific instance of an Audit
command, the parameter identifier and the value to be
used for the parameter can be submitted on the specific
request itself.