API Guide
601355 Rev A API Functions 2-945
Functins
VSCMD_
ModifyPool_SetDefaults
VSCMD_ModifyPool_SetDefaults sets the
command-level default parameters for Modify Pool commands.
Two levels of default parameter settings are used in the API
software—global defaults and command-specific defaults.
• Global defaults for all commands are initialized at startup
and can be set or retrieved using VS_Global_SetFields
and VS_Global_GetFields function calls.
• Command-specific parameter defaults for Modify Pool
commands are set with
VSCMD_ModifyPool_SetDefaults. If
command-specific defaults are set for Modify Pool
commands, they override the global defaults for all
commands.
Synopsis VST_BOOLEAN VSCMD_ModifyPool_SetDefaults
( “…”,
VSID_ENDFIELD)
Arguments •“…” = Variable length argument list consisting of pairs of
Arguments. Each pair of Arguments consists of a parameter
identifier, followed by the value to be used as a command
default value for the field. The valid parameter identifiers
and types for this function are shown in the following
"Parameters" paragraph.
Tip
To override a default (global or command-specific)
parameter value for a specific instance of a Modify Pool
command, the parameter identifier and the value to be
used for the parameter can be submitted on the specific
request itself.