API Guide
2-694 API Functions 601355 Rev A
39 rc = VSCMD_IntransitQuery(cmd,
40 VSID_ENDFIELD);
41 }
42 return ( rc );
43 }
Notes The API must be initialized with a call to VS_Initialize
before this function can be executed.
VolServ can generate intermediate status in response to an
Intransit Query request.
VSCMD_IntransitQuery does not trigger any MediaClass
callbacks from VolServ.
The query option on the Intransit Query command is not
currently supported by VolServ. VolServ unconditionally
returns the identifiers of all media in the intransit state.
Only media in the intransit state are queried and returned.
The total length of time the API software waits for a command
status in synchronous mode from VolServ is
(VSID_RETRY_LIMIT plus 1) multiplied by
VSID_TIMEOUT_VALUE.
If the VSID_ENTERPRISE_ID parameter is set to any value
other than zero, the intermediate and final status for this request
is returned to the enterprise registered with VolServ.
When the API software is operating in asynchronous mode,
client software must call VS_Select to receive intermediate
and final status on command requests submitted through the
API interface to the VolServ system.
Two levels of default parameter settings are used in the API
software— global defaults and command-specific defaults.