ADTRAN 1200657L2, 4200659L1, 4175043L2, 4200659L5, 4200659L8, 4200659L2 Condition, Description

Chapter 4. Status

Condition	Description
LOMF	(Loss of Multiframe)
	The controller card detects loss of H4 multiframe
	from the network.
AIS-L	(Line Alarm Indication Signal)
	The controller card is receiving a line alarm
	indication signal. The Section Terminating
	Equipment generates AIS-L after detecting LOS
	or LOF.
AIS-P	(Path Alarm Indication Signal)
	The controller card is receiving a path alarm
	indication signal. AIS-P is defined as all ones in
	bytes H1, H2, and H3 as well as all ones in the
	entire STS synchronous payload envelope.
RFI-L	(Line Remote Failure Indication)
	The controller card is receiving a line remote
	failure indication. RFI-L is declared when the
	incoming line remote defect indication (RDI-L,
	“110” pattern in bits 6, 7, and 8 of the K2 line
	overhead byte) lasts for 2.5 +/- 0.5 seconds.
RFI-P	(Path Remote Failure Indication)
	The controller card is receivinga path remote
	failure indication. RFI-P is declared when the
	incoming path remote defect indication (RDI-P, “1”
	in bit 5 of the G1 path overhead byte for
	contiguous frames) lasts for 2.5 +/- 0.5 seconds.
SLM-P	(Path Signal Lavel Mismatch)
	The controller card is detecting a signal label
	mismatch. A received signal label is mismatched
	if it does not equal the locally provisioned value or
	the value “equipped non-specific”.
UEQ-P	(Path Unequipped)
	The controller card detects that the path is
	unequipped. The path is unequipped if it is not
	provisioned. Byte C2 of the STS path overhead is
	set to zero.

61200659L1-1 MX2800 STS-1 User Manual 4-3