ADTRAN 4175043L2 10. Dialup Options Menu Primary and Secondary Phone Numbers, Initializing String

Chapter 3. Configuration

Figure 3-10. Dialup Options Menu

Primary and Secondary Phone Numbers

When the MX2800 STS-1 dials out to send a trap, it first dials the PRIMARY PHONE NUMBER. If the call is unsuccessful, it tries the SECONDARY PHONE NUMBER. Attempts between the two numbers continue until a call is established and the trap is reported (or until each number’s maximum for redial attempts is reached; see Maximum Redial Attempts below).

Initializing String

The AT command entered in this field is used to initialize the modem. Normally, this field should be left at the default setting (ATZ).

Dial String

The AT command entered in this field causes the modem to dial out. Normally, this field should be left at the default setting (ATDT).

Maximum Redial Attempts

The MX2800 STS-1 attempts to establish a call the number of times entered in this field. If a successful call is not established after the final attempt, the MX2800 STS-1 discards the trap messages.

61200659L1-1 MX2800 STS-1 User Manual 3-15