ADTRAN 4200659L1, 4175043L2 STS-1 Active Alarm Traps, If enabled, the unit issues a trap when

Models: 1200287L1 1200291L1 1200657L2 4200659L4 4200659L6 4200659L3 4200659L7 4200659L2 4200659L8 4200659L5 4175043L2 4200659L1

1 192
Download 192 pages 19.94 Kb
Page 72
Image 72
STS-1 Active Alarm Traps

Chapter 3. Configuration

STS-1 Active Alarm Traps

Trap

If enabled, the unit issues a trap when...

 

 

LOS

(Loss of Signal)

 

The controller card has lost the network receive

 

signal.

 

 

LOF

(Loss of Framing)

 

The controller card detects a loss of framing

 

from the network.

 

 

LOMF

(Loss of Multiframe)

 

The controller card detects loss of H4

 

multiframe from the network.

 

 

AIS-L

(Line Alarm Indication Signal)

 

The controller card is receiving a line alarm

 

indication signal. Line AIS defect is detected as

 

a "111" pattern in bits 6, 7, and 8 of the K2 byte

 

in five consecutive frames.

 

 

AIS-P

(Path Alarm Indication Signal)

 

The controller card is receiving a path alarm

 

indication signal. AIS-P is defined as all ones in

 

bytes H1, H2, and H3 as well as all ones in the

 

entire STS synchronous payload envelope.

 

 

RFI-L

(Line Remote Failure Indication)

 

The controller card is receiving a line remote

 

failure indication. RFI-L is declared when the

 

incoming line remote defect indication (RDI-L,

 

"110" pattern in bits 6,7, and 8 of the K2 line

 

overhead byte) last for 2.5 +/- 0.5 seconds.

 

 

RFI-P

(Path Remote Failure Indication)

 

The controller card is receiving a path remote

 

failure indication. RFI-P is declared when the

 

incoming path remote defect indication (RDI-P,

 

"1" in bit 5 of the G1 path overhead byte for 5

 

contiguous frames) last for 2.5 +/- 0.5 seconds.

 

 

3-26

MX2800 STS-1 User Manual

61200659L1-1

Page 72
Image 72
ADTRAN 4200659L1, 4175043L2, 4200659L5, 4200659L8 STS-1 Active Alarm Traps, If enabled, the unit issues a trap when