ADTRAN QFO-C warranty Changing the DSX Equalization, Changing the Loopback Timeout Value

NOTE

Port 0 (all ports) ÒOut of ServiceÓ disables the entire module. Port 0 must be ÒIn ServiceÓ for any Port 1 to 4 to be active.

Changing the DSX Equalization

1.From the Provisioning of All Ports screen, type Ò1Ó and press Enter to select DSX Equalization. The DSX Equalization Screen (Figure 11) will appear.

2.Type the number corresponding to the desired equalization value and press Enter.

Changing the Loopback Timeout Value

1.From the Provisioning of All Ports screen (Figure 10), type Ò2Ó and press Enter to select Loopback Timeout. The Loopback Timeout Screen (Figure 12) will appear.

2.Type the number corresponding to the desired loopback timeout value and press Enter.

Shelf:	Slot:	10		Total Access System	07/15/99 10:43
Unacknowledged Alarms:				MINOR
		DSX	Equalization: 0 to 133' ABAM
		1.	0 to 133' ABAM
		2.	134	to 266' ABAM
		3.	267	to 399' ABAM
		4.	400	to 533' ABAM
		5.	534	to 655' ABAM
		Selection:
			‘?’	- System Help Screen
		Figure 11. DSX Equalization Screen
Shelf:	Slot:	10		Total Access System	07/15/99 10:43
Unacknowledged Alarms: None
			Loop Back Timeout: O min.
			1.	Disabled
			2.	20 min.
			3.	60 min.
			4.	120 min.
			Selection:
			‘?’	- System Help Screen

Figure 12. Loopback Timeout Screen

61181300L1-5C Section 61181300L1-5C, Issue 3 15