ADTRAN QFO-C warranty DS1

Table 10. QFO-C Specifications

DS1
Input Level	0 to -9 dBm
Output Level	0 dB with DSX buildout from 0 to 655 ft. in 133 ft. increments
Data Frequency Acceptance
1.544 Mb/sec. ±200 b/s
In/Out Impedance	100 Ω
Output Jitter	< 0.08 UI (unit interval)
Max. Delay	Four data bits
Severe BPV Error Threshold	10 -3
Optical Transport
ANSI X3T9.5 Fiber Distributed Data Interface
Optical Specifications
Cable Type	9/125 mm single mode
Connector Type	SC (single or duplex)
Operating Wavelength	1310 nm
Transmitter	Laser type
Output Launch Power	-8 dBm, minimum; -6 dBm, typical
Receiver Sensitivity	-30 dBm, minimum; -33 dBm, typical
Receiver Input Level	-3.0 dBm maximum
Minimum Optical Budget	22 dBm
Typical Optical Budget	25 dBm

Payload Specifications

Four independent DS1 (1.544) Circuits

Performance/Alarm Overhead (System Use Only)

Temperature Range
Operating	-40 to +65° C
Storage	-40 to 85° C
Humidity
0 to 95%, non-condensing
General Specifications
Supply Voltage	-42 to -56 Vdc
Maximum Power	8 Watts @ -48 Vdc
Supply Current	150mA at -48 Vdc, typical
Dimensions	5.5Ó Height; .75Ó Width; 10Ó Depth
Weight	10.6 oz. in an anti-static bag

61181300L1-5C Section 61181300L1-5C, Issue 3 29