ADTRAN warranty QFO-C Provisioning Options

Table 8. QFO-C Provisioning Options

Option	Description	Values	Default
Service State	Enables normal connection to the DSX or multiplexer	In Service	Out of Service-
	interface		Unassigned
	Loops will train up but will not connect to the DSX or	Out of Service -
	multiplexer interface	Unassigned
	Supports active connections to the DSX or multiplexer	Out of Service -
	interface; however, alarms cannot be generated	Maintenance
DSX Equalization	Conditions the signal to provide a proper 0dB level	0 to 133' ABAM	0 to 133' ABAM
	output to the DSX	134 to 266' ABAM
		267 to 399' ABAM
		400 to 533' ABAM
		534 to 655' ABAM
Loopback Timeout	Releases a code-activated loopback in the time selected	Disabled	120 minutes
	after initial activation	20 minutes
		60 minutes
		120 minutes
AIS to DSX (Loss of T1)	Generates AIS to network on LOS from facility for a	Enabled, Disabled	Disabled
	specific port
AIS to DSX (FLOS)	Generates AIS to network on all ports on Fiber LOS	Enabled, Disabled	Disabled
	from facility
ES Threshold (15-Min.)	Enters a specific ES 15-minute threshold that, when	30, 150	150
	exceeded, will generate an alarm
SES Threshold (15-Min.)	Enters a specific SES 15-minute threshold that, when	15, 75	75
	exceeded, will generate an alarm
UAS Threshold (15-Min.)	Enters a specific UAS 15-minute threshold that, when	15, 75	75
	exceeded, will generate an alarm
ES Threshold (24-Hour)	Enters a specific ES daily threshold that, when exceeded,	2880, 14400	14400
	will generate an alarm
SES Threshold (24-Hour)	Enters a specific SES daily threshold that, when	1440, 7200	7200
	exceeded, will generate an alarm
UAS Threshold (24-Hour)	Enters a specific UAS daily threshold that, when	1440, 7200	7200
	exceeded, will generate an alarm
Circuit ID (one for each port)	32-character alphanumeric character field		Null string

8 Section 61181300L1-5C, Issue 3 61181300L1-5C