To add a distributed spare while transforming an array:
1.On the Array menu, click Transform.
2.Configure the new array.
3.In the Distributed Spare field, click Enabled.
To remove a distributed spare:
1.On the Array menu, click Transform.
2.Configure the new array.
3.In the Distributed Spare field, click Disabled.
4.4.3 Using Dedicated Sparing
A dedicated spare is a disk that you assign as an alternate disk for a spe- cific array. Should a disk fail in that array, the alternate disk is used to replace the failed disk and the array is rebuilt. A dedicated spare can be assigned to any redundant array type, and up to four spares can be assigned to an array.
| 48 |
