Note: For installations of SuSE Linux, a popup appears that says, “A new device was found, do you want to configure it?” If you do not want to see this popup when you create arrays, you can check the “Do not notify me” checkbox.
7.The array is marked Ready for use, and the text at the top of Array Configuration returns to a description of the menu items.
8.When you are finished creating arrays, resume the boot process:
a.From the Main menu, highlight Continue to Boot.
b.Press Enter. No reboot is required.
Figure 5.1: Create an array
In the example above, a
57 | Chapter5 |
