External Cache
When enabled, supports an external cache SRAM.
The options are: Enabled (Default), Disabled.
Quick Power On Self Test
When enabled, allows the BIOS to bypass the extensive memory test.
The options are: Disabled (Default), Enabled.
Boot Sequence
Allows the system BIOS to first try to boot the operating system from the selected disk drive.
The options are: A, C (Default); C (only); C, CDROM, A; CDROM, C, A.
Swap Floppy Drive
When enabled, allows you to switch the order in which the operating system accesses the floppy drives during
The options are: Disabled (Default), Enabled.
Boot Up Floppy Seek
When enabled, assigns the BIOS to perform floppy disk drive tests by issuing seek commands. Note that such tests are
The options are: Enabled (Default), Disabled.
Boot Up NumLock Status
When set to "On", allows the BIOS to automatically enable the NumLock function when the system boots up.
The options are: On (Default), Off.
Memory Parity Check
The options are: Disabled (Default), Enabled.
Typematic Rate Setting
The term typematic means that when a keyboard key is held down, the character is repeatedly entered until the key is released. When this item is enabled, you may change the typematic repeat rate.
The options are: Disabled (Default), Enabled.
104 |
| User's Manual |
