ECP Mode Use DMA
You can choose different DMA modes for data transfer.
The options are: 3 (Default), 1.
PS/2 mouse function
When enabled, the PS/2 mouse is activated.
The options are: Disabled (Default), Enabled.
USB Controller
When enabled, the USB devices are activated.
The options are: Disabled (Default), Enabled.
Ethernet Boot ROM
When enabled, your system will be able to boot up through the Ethernet.
The options are: Disabled (Default), Enabled.
Panel Type
The panel type is designated by the manufacturer, according to your LCD panel type.
9.11 Password Setting
To enable the password setting, select the item from the Standard CMOS Setup. You will be prompted to create your own password. Type your password up to eight characters and press "Enter". You will be asked to confirm the password. Type the password again and press "Enter". You may also press "Esc" to abort the selection and not enter a password. To disable the password, press "Enter" when you are prompted to enter the password. A message will appear, confirming the password is disabled.
Under the BIOS Features setup, if "System" is selected under the Security Option field and the Supervisor Password is enabled, you will be prompted for the supervisor password every time you try to enter the CMOS Setup utility. If "System" is selected and User Password is enabled, you will be requested to enter the user password every time you reboot the system. If "Setup" is selected under the Security Option field and User Password is enabled, you will be prompted only when you reboot the system.
Chapter 9 | Award BIOS Setup | 117 |
