7.Unscrew the four screws on the power supply board. The power supply board can be detached from the plastic housing after unplug- ging the cables from the motherboard.
8.Remove the front panel by hand.
9.Unscrew the ten screws on the LCD holding plate to seperate the plastic housing and LCD holding plate.The LCD inverter can also be detached by unscrewing the three screws at the bottom (Toshiba LCD only).
10.Detach the plastic housing.
11.Detach the LCD by unscrewing the four screws located on the each corners.
12.The touchscreen is stuck on the LCD holding plate by a strongly
Note: | Because of the modular design of the LCD and touch- |
| screen, you do not disassemble the whole system step |
| by step if you would like to replace the defective LCD or |
| touchscreen.You just start disassembling the module |
| from the step 8. Then you can easily remove the LCD |
| and touchscreen by step 9 to step 12. |
