Chapter 8 Award BIOS Setup
119
After you have made changes in the BIOS setup, press "Esc" to return
to the main menu. Move the cursor to "Save and Exit Setup", or press
"F10" and then press "Y", to change the CMOS Setup. If you did not
change anything, press "Esc" again or move the cursor to "Exit
Without Saving" and press "Y" to retain the setup settings. The
following message will appear at the center of the screen to allow you
to save data to CMOS and exit the setup utility:
SAVE to CMOS and EXIT (Y/N)?
8.14 Exit Without Saving
If you select this feature, the following message will appear at the
center of the screen to allow you to exit the setup utility without saving
CMOS modifications:
Quit Without Saving (Y/N) ?
8.13 Save and Exit Setup
Figure 8-9: Save and exit setup screen