62
PPC-A84/A120 User's Manual
5.1 Introduction
The PPC-A84/A120 has an on-board PCI flat panel/VGA interface.
The specifications and features are described as follows:

5.1.1 Chipset

The PPC-A84/A120 Series uses a NS CX5530 chipset for its SVGA
controller. It supports many popular 18-bit LCD displays and conven-
tional analog CRT monitors. The VGA BIOS supports LCD. In
addition, it also supports interlaced and non-interlaced analog moni-
tors (color and monochrome VGA) in high-resolution modes while
maintaining complete IBM VGA compatibility. Digital monitors (i.e.
MDA, CGA, and EGA) are NOT supported. Multiple frequency
(multisync) monitors are handled as if they were analog monitors.

5.1.2 Display memory

With 2 ~ 4 MB share memory, the VGA controller can drive CRT
displays or color panel displays with resolutions up to 1024 x 768 at
64 K colors. The display memory can be expanded to 4 MB in BIOS
for true-color resolution of 1024 x 768.

5.1.3 Display types

CRT and panel displays can be used simultaneously. The
PPC-A84/120 can be set in one of three configurations: on a CRT, on a
flat panel display, or on both simultaneously. The system is initially set
to simultaneous display mode.
5.2 Installation of SVGA Driver
Complete the following steps to install the SVGA and audio driver.
Follow the procedures in the flow chart that apply to the operating
system that you you are using within your PPC-A84/A120 .

Note1: The following windows illustrations are examples

only. You must follow the flow chart instructions and

pay attention to the instructions which then appear

on your screen.