6.2Set-up and Installation of the Modules
1.To set up the unit, position it in its installation location and use a spanner to turn the height- adjustable feet until they reach the floor. The feet are located at the four corners of the baseplate.
BraLockike ngpadfoot
2.Push the communication module into the top left- hand corner of the uppermost slot (see illustration above).
3.Push all PROTECT 1.040 UPS modules into the slots one after the other in order to complete installation of the modules (see illustrations below).
Note: You must install the modules one after the other. Only once one module has been engaged completely in the frame can the next one be installed.
31