AEG 1.04 11Reference Table for the Display and UPS Operating Problems, 11.1 Normal operation, 11.2Battery Operation, 11.3Bypass Operation

11Reference Table for the Display and UPS Operating Problems

11.1 Normal operation

Operating status /

Operating problems

Mains in tolerance range

Mains not in tolerance, i.e. batt. operation

	LED indications				Warning signal	LC displays	Notes
Normal (Normal)		Battery Battery) (On	Bypass (Fault)	Fault (Fault)
					None	"utility power
					1 acoustic signal
					every 4s	is abnormal"

11.2Battery Operation

Battery voltage	1 acoustic signal	"utility power
in tolerance
	every 4s	is abnormal"
range
Battery voltage	1 acoustic signal	"battery voltage	Check battery
not in tolerance	every 2s	is too low"	system; poss.
range			Reduce load

11.3Bypass Operation

Operating status /

Operating problems

Mains in tolerance range; bypass mode

Mains not in tolerance range; bypass mode

LED indications				Warning signal	LC displays	Notes
Normal (Normal)	Battery Battery) (On	Bypass (Fault)	Fault (Fault)
				1 acoustic		Alarm stops
						when UPS
				signal every
						returns to
				2 min.
						normal mode
				1 acoustic	"utility power	USVoutput
						voltage is
				signal every 4 s	is abnormal"
						switched off

45