3) Press ESC |
|
| 4) Press ▼ for the following | |||
|
|
| information |
|
| |
|
|
|
| |||
LOAD: 0% | BATT: 137 |
| OUTPUT PARAMETER | |||
I / P VOLT: 232 | 232 231 |
|
| RN | SN | TN |
O / P VOLT: 0 |
|
| VOLT: | 0V |
|
|
O / P FREQ: 0.0Hz |
| CURR: | 0A |
|
| |
STATUS: NO OUTPUT |
| FREQ: 0.0Hz |
|
| ||
|
|
|
|
|
|
|
Note: When the mains is connected for the first time, the UPS does not output any voltage (Figs. correspond to this status)
5) Press ▼ again |
|
| 6) Press ▼ again |
| |||
| for the following information |
| for the following inform. | ||||
|
|
|
| ||||
| INPUT PARAMETER |
| POWER PARAMETER | ||||
| RN | SN | TN |
|
| kW | kVA |
| VOLT: 232 | 232 | 231 |
| TOTAL: 0.00 | 0.00 | |
| FREQ: 50.0Hz |
|
|
| UPS1: | 0.00 | 0.00 |
| RST INPUT |
|
|
| UPS2: | 0.00 | 0.00 |
|
|
|
|
|
|
|
|
Note: The status of each UPS module is displayed cyclically in the bottom two lines.
7) Press the ▼ key again for the following information
BATTERY PARAMETER BAT VOLT: 136V VOLUME: 100% STATUS: CHARGING
Note: Battery status is
CHARGING, DISCHARGE or BATT OPEN (battery not connected).
36