AEG 1.04 11.6Overload Protection

11.6Overload Protection

Operating status /

Operating problems

Overload in normal operation UPS warning

Overload in normal operation > Switchover

Overload in battery operation UPS warning

Overload in battery operation > switch-off

Overload in bypass operation

	LED indications				Warning	LC displays	Notes
					signal
Normal (Normal)		Battery Battery) (On	Bypass (Fault)	Fault (Fault)
					1 acoustic	"Output
					signal		Reduce the load
						overload"
					every 2 s
					Continuous	"Output
					warning	overload"Alarm	Reduce the load
					signal	code: 46
					1 acoustic	"Output
					signal		Reduce the load
						overload"
					every 2 s
					Continuous	"Output overload"	Reduce the load
					warning	Alarm code: 46
					signal
					1 acoustic	"Output
					signal		Reduce the load
						overload"
					every 2 s

Note: = LED lights up = LED flashes

If you cannot solve the problem that has occurred, stop the entire procedure, switch off the UPS and disconnect the UPS from the mains. Please contact our hotline in this case (see page 5).

Please have the serial number of the unit as well as the purchase date at hand. The hotline will provide you with technical support and can inform you about further procedures once you have described the problem.

47