Aga Ranges DC6 (FFD) owner manual A. To Remove Hotplate

WARNINING: WHEN SERVICING OR REPLACING GAS CARRYING COMPONENTS, DISCONNECT GAS SUPPLY TO APPLIANCE AND AFTER COMPLETION CHECK APPLIANCE FOR GAS SOUNDNESS.

WARNING: WHEN SERVICING OR REPLACING COMPONENTS, ISOLATE THE APPLIANCE FROM THE ELECTRIC SUPPLY AND BEFORE RE-CONNECTING, CHECK FOR ELECTRICAL SUPPLY.

A.TO REMOVE HOTPLATE

1.Isolate from electric supply.

2.Remove pan supports and burner caps (See Fig. 22).

3.Remove burner fixing screws (14) and hotplate fixing nuts (8).

4.Lift off burner fixing rings (6).

5.Lift off hotplate castings in the following order: left hand, right hand, and centre (See Fig. 23).

NOTE: Each hotplate casting has an earth lead. Each lead must be disconnected before completely removing hotplate casting (See Fig. 24).

6, Re-assemble in reverse order.

Fig. 22 DESN 512935 A

Fig. 23 DESN 512393 C

50