Aga Ranges DC6 (FFD) owner manual D. To Remove Handrail See Fig, E. To Remove Timer

D.TO REMOVE HANDRAIL (SEE FIG. 25)

1.Loosen 2 grub screws, one at each end of hand rail (see fig. 25) using 3/32” socket key.

2.Slide handrail forwards, off locating studs.

E.TO REMOVE TIMER

1.Isolate from electric supply.

2.Proceed as ‘TO REMOVE HOTPLATE CASTINGS’.

3.Remove fixing screws (4). Two top rear and two lower front of timer housing.

4.The timer assembly can now be lifted upwards sufficiently to disconnect electric cables at rear of timer. (See Fig. 26).

NOTE: Take care to identify cable connections.

5.Slacken timer fixing screw sufficiently to allow timer securing strip to slide out of facia panel. (See Fig. 26).

6.Remove timer clamping screw, withdraw clamp and lift out timer. (See Fig. 27).

7.Re-assemble in reverse order.

Fig. 26 DESN 512401

Fig. 27 DESN 512402

52