Agilent Technologies 6625A Supplemental Characteristics Output Power Watt Output, AC Input Power

	Table 1-3. Supplemental Characteristics (continued)
Output Power	25 Watt Output		50 Watt Output
Output Range	Lo Range	Hi Range	Lo Range	Hi Range
Output Volts	0-7 V	0-50 V	0-16 V	0-50 V
Output Amps	0-15 mA	0-500 mA	0-200 mA	0-2 A
Temperature Coefficient-Measurement:
Voltage	(0.002% + 0.1 mV)	(0.002% + 0.1 mV)	(0.002% + 0.1 mV)	(0.002% + 0.1 mV)
	per° C +0.5 mV	per° C +4 mV	per° C +1 mV	per° C +4 mV
± Current	(0.0025% + 1.5 μA)	(0.0025% + 10 μA)	(0.0025% + 20 μA)	(0.0025% + 50 μA)
	per° C + 1 μA	per° C + 40 μA	per° C + 15 μA	per° C + 150 μA
Long Term Drift: (In an 8 hour period following a 30 minute warm up)
Voltage	0.006% + 0.5 mV	0.006% + 2 mV	0.006% + 0.5 mV	0.006% + 2 mV
+ Current	0.01% + 5 μA	0.01% + 20 μA	0.01% + 40 μA	0.01% + 60 μA
Short Term Drift: (Within 30 minutes after a line and/or load change):
Voltage	0.002 + 0.5 mV	0.002 + 1 mV	0.002 + 0.5 mV	0.002 + 1 mV
+ Current	0.01% + 2 μA	0.01% + 20 μA	0.01% + 25 μA	0.01% + 60 μA

DC Floating Voltage:

No output terminal may be more that 240 Vdc from any other terminal or from chassis ground. Also, no overvoltage terminal may be more than 240 Vdc from any other terminal or chassis ground.

Remote Sense Capability: (see pages 50 - 52):

Outputs can maintain specifications with up to 10 volt total in the remote sense leads.

AC Input Power	: 550 Watts
Programming Resolution:
Voltage	460 μV	3.2 mV	1 mV	3.2 mV
+ Current	1 μA	33 μA	13 μA	131 μA
OVP	230 mV	230 mV	230 mV	230 mV
Readback Resolution:
Voltage	483 μV	3.3 mV	1.1 mV	3.3 mV
+ Current	1 μA	48 μA	14 μA	160 μA
- Current	1 μA	37 μA	14 μA	151 μA

Fixed Overvoltage Protection: (Measured at output terminals +V and -V)

Minimum	56 V	56 V	56 V	56 V
Nominal	60 V	60 V	60 V	60 V
Maximum	64 V	64 V	64 V	64 V

18General Information