Agilent Technologies 6626A, 6628A Accessories, Description, Model, Output Combinations Available

Accessories

10833A GP-IB cable, 1 m (3.3 ft)

10833B GP-IB cable, 2 m (6.6 ft)

10833C GP-IB cable, 4 m (13.2 ft)

10833D GP-IB cable, 0.5 m (1.6 ft)

10834A GP-IB connector extender Slide mount kit (1494-0059)

Description

The Agilent power supply features a combination of programming capabilities and linear power supply performance that make them ideal for systems applications. The models in this family offer a total of up to 200 watts of output power, with voltages up to 50 volts and currents up to 2 amps. The output combinations that correspond to each model are shown in Table 1-1. Each isolated output has a high resolution and standard resolution range, as shown in Figure 1-1.

Model

Agilent 6625A

Agilent 6626A

Agilent 6628A

Agilent 6629A

Table 1-1 Output Combinations Available

Output 1	Output 2	Output 3
25 W	50 W	--
25 W	25 W	50 W
50 W	50 W	--
50 W	50 W	50 W

Output 4

--

50W

--

50W

Figure 1-1. Output Operating Range

Output 2 of the Agilent 6625A and outputs 3 and 4 of the Agilent 6626A and all outputs of the Agilent 6628A and Agilent 6629A have an "L’’ shaped characteristic. The L shaped characteristic allows you to use the same output to power loads with different voltage and current requirements. The power supply automatically selects one of the operating ranges based on the last parameter (voltage or current) that is set. If a high resolution or a standard resolution application is required for either voltage or current, VRSET and IRSET should be used (see Appendix C-Command Summary). Additionally, each output contains an active downprogrammer, which means that voltage downprogramming can be accomplished as quickly as upprogramming, even without a load.

12General Information