Agilent Technologies 87130A manual ERRor?, Command Errors, Syntax, Description, Remote Operation

Remote Operation

:ERRor?

:ERRor?

Syntax

SYSTem:ERRor?

Description

As SCPI specifies, this reads out the full error number and error description for the first error in the error queue. It can be issued repeatedly until the queue is empty (indicated by 0,”No error”).

All possible error numbers with their descriptions are listed below.

Command Errors

These set the Cmd Err bit in ESR.

-100,Command error

-100,Command error;SCPI unused invalid character -101,Invalid character;bad type Syntax error -103,Invalid separator

-104,Data type error -105,GET not allowed -108,Parameter not allowed

-108,Parameter not allowed;invalid -109,Missing parameter -112,Program mnemonic too long -113,Undefined header -121,Invalid character in number -123,Exponent too large -124,Too many digits -128,Numeric data not allowed -131,Invalid suffix

-138,Suffix not allowed

-141,Invalid character data

-148,Character data not allowed -150,String data error -151,Invalid string data -158,String data not allowed -161,Invalid block data -168,Block data not allowed -170,Expression error;too long -171,Invalid expression -178,Expression data not allowed

Agilent 87130A Operating and Service Manual 4-43