Agilent Technologies 87130A manual DELete, Syntax, Description, Example Command

Remote Operation

:DELete

:DELete

Syntax

	:PATH 	<path name>	
			
ROUTE 		:DELete <group name>
	:GROUP 		
		[:ALL]	

Description

This command deletes:

•All data associated with the specified path or group and frees up the path storage register.

•All channels from the PFAIL list.

This command sets memory to an initial state.

NOTE	The :DELete and the :DELay shortform is the same. The :DELete command
	applies only in syntax with other subsystems and not directly to channel lists
	from ROUTe.
	•
Example Command		ROUTE:PATH:DELETE ATTEN_14;
	This deletes the path with pathname ATTEN_14 and all data in it.
	•	ROUTE:PATH:DELETE:ALL;

This deletes all paths.

•ROUTE:GROUP:DEL ATTEN;

This deletes all data associated with the group ATTEN. The group name is set to the default (refer to MEM:DELETE).

•ROUTE:GROUP:DEL:ALL;

This deletes all data associated with all the groups. The group names are set to the default (refer to MEM:DELETE).

•ROUTe:PFAil:DELete;

This command removes all data from the PFAIL:OPEN and PFAIL:CLOSE lists.

4-38Agilent 87130A Operating and Service Manual