Agilent Technologies 87130A manual ESE Event Status Enable, Example Command Example Query, Syntax

Remote Operation

*ESE (Event Status Enable)

*ESE (Event Status Enable)

Syntax

*ESE mask

*ESE?

Description

The *ESE command sets the Standard Event Status Enable Register bits. This register contains a mask value for the bits to be enabled in the Standard Event Status Register. A one in the Standard Event Status Enable Register will enable the corresponding bit in the Standard Event Status Register; a zero will disable the bit.

Refer to the table below for the information about the Standard Event Status Enable Register bits, bit weights, and what each bit masks. Valid number range is 0 to 255.

The *ESE query returns the current contents of the register.

Table 4-2 Event Status Enable Register Bit Definitions

Example Command

Example Query

Bit	Weight	Enables
7	128	PON- Power ON
6	64	(not used)
5	32	CME- Command Error
4	16	EXE- Execution Error
3	8	DDE- Device Dependent Error
2	4	QYE- Query Error
1	2	(not used)
0	1	OPC- Operation Complete

OUTPUT 709;”*ESE 64”

OUTPUT 709;”*ESE?”

ENTER 709; Event

PRINT Event

4-14Agilent 87130A Operating and Service Manual