Raven and PinPoint CDMA User Guide Version 1.12
4 Windows Dial-Up Networking Setup This section describes the setup of Windows to enable communications over the
CDMA 1xRTT network. Windows 2000 is used as the example because it the one
Windows OS revision that carries the most similarity to both Windows 98 as well as
Windows XP.
4.1 Add Windows Modem Driver
4.1.1 Setup Modem
• Connect the modem to the computer with the DB-9 cable.
• Plug in the AC adapter, connect the antenna(s) and power on the modem.
• Obtain administrator privileges on your system.
If you do not know how, check with your system administrator.
4.1.2 Add Modem Driver
1. Select Start→ Settings→ Control Panel→ Phone and Modems Options.
2. You should see be in the Phone And Modem Options dialog box. Select the
"Modems" tab.
3. Select Add.
AirLink Communications, Inc. Page 12 March 24, 2004