Airlink Raven and PinPoint CDMA , 11.2 Mounting the PinPoint

Raven and PinPoint CDMA User Guide Version 1.12
AirLink Communications, Inc. Page 61 March 24, 2004
11.2 Mounting the PinPoint
First locate a place in the vehicle where the PinPoint will go. Make sure the PinPoint
will be away from direct exposure to the elements (sun, rain, etc.). Possible locations
are: in a trunk where luggage or other items won’t hit it, in the console, or behind the
seats in pickup trucks. Ensure the location is secure and will not put the PinPoint in
the way of anything.
1. Mount the PinPoint on the provided bracket.
2. Connect the PinPoint’s power cable to a fused 12 or 24 VDC power
source. (Note: PinPoint will draw less than 1/2 Amp at 12V.)
3. Mount the CDMA Antenna and route the cable to the PinPoint location.
Make sure any excess cable is tie-wrapped and not in the way of any
luggage, passengers, or anything else.