Aiwa NSX-A508 manual Repeat for the rest of the tracks for side A, Press EDIT/CHECK while, 3,7,8,9

6 Repeat step 5 for the rest of the tracks for side A.

A track whose playing time is longer than the remaining time cannot be programmed.

	5	7 Press EDIT/CHECK while	pressing SHIFT on the
	3,7,8,9	remote control to select side B and program the
		tracks for side B.
	E ; 4,5	After confirming “Bon the display, repeat step 5.
		Tape side B (reverse side)
	c)=;~ 3,7,8,9
		I
	o’
l. —._ _
		8 Press EDIT/CHECK while pressing SHIFT to
		select side A and press ●
	astart recording.			REC/REC MUTE to

In the programmed edit recording function the tracks can be programmed while checking the remaining time on each side of the tape.

CD play and recording of edited tracks for the first side start simultaneously. When the last track programmed for side A is finished, deck 2 enters the recording stop mode. After entering the recording stop mode, go to step 9.

m

The programmed edit recording will not start from a point halfway in the tape. The tape must be recorded on from the beginning of either side.

1 Insert the tape into deck 2.

Insert the tape with the side to be recorded on first facing out from the unit.

2Press CD and load the disc(s).

3Press EDIT/CHECK twice while pressing SHIFT

on the remote control.

“EDIT” and “PRGM” appear.

●When “AI”is displayed, press EDIT/CHECK while pressing SHIFT again.

4 Press numbered buttons on the remote control to designate the tape length.

10 to 99 minutes can be specified.

c The +, - or MULTI JOG are also available to designate the tape length.

Tape length Tape side A (front side)

9 Press EDIT/CHECK while pressing SHIFT on the remote control for recording of the second side.

“B”is displayed.

10 Turn over the tape in deck 2 and press ● REC/

REC MUTE to start recording.

Recording starts.

To stop recording

Press ■ . Recording and CD play stop simultaneously.

To check the order of the programmed track numbers Beforerecording,pressEDIT/CHECK while pressingSHIFT on

the remotecontrolto selectsideA or B, and press- or * repeatedly.

Disc number Track number Program number

Tape side	Programmed track
	numbers

Maximum recording time for side A

5 Press DISC DIRECT PLAY 1-3 to select a disc. Then, press numbered buttons O-9 and + 10 on the remote control to program a track.

Example: To select the 10th track of disc 2, press DISC DIRECT PLAY 2, then press +10 and O.

Remaining time	Programmed
on side A	tracks

To change the program of each side

Press EDIT/CHECK while pressing SHIFT on the remote control

to select side A or B, and press ■ CLEAR to clear the program on the selected side. Then program tracks again.

To clear the edit program

Press ■ CLEAR twice so that “EDIT” disappears on the display.

‘CD EDIT/CHECK on the unit is also available instead of EDIT CHECK on the remofe control.

7 ~ ENGLISH