Aiwa NSX-A508 manual Selecting, Programmed, Equalization Curve, Press LOW, Press HIGH

GEQ

SHIFT

3,EIMIIS-=4Swcl”s %w3!?- *,”..,,.,:.!.	~ *“, g, ,:,, .,_. #j,, ,, -,.,,	~~ .4 .: L“ _ ‘, .’ ,, = ‘;=. ;- : .! _ ,.- ; ,- = i- ,--
SELECTING	THE	PROGRAMMED

EQUALIZATION CURVE

This unit provides the following 5 different programmed equalization curves.

ROCK: Powerful sound emphasizing treble and bass

POP: More presence in the vocals and midrange

JAZZ: Accented lower frequencies for jazz-type music

CLASSIC: Enriched sound with heavy bass and fine treble.

LATIN: JAZZ- type equalization curve with higher frequencies

Press GEQ, and turn MULTI JOG to select one of the programmed equalization curve within 4 seconds.

GRAPHIC EQUALIZER

“GRAPHIC EQUALIZER appears (except “GEQ OFF”) and the GEQ mode is displayed cyclically as follows.

~ROCK+ POP -JAZZ+ CLASSIC e LATIN 1

~----------	Progra:med		mode ----------		:
LGEQOFF—	M4—		M3—	M2—	Ml J
(cancel)	t	Manual		mode	-----:
	.------

To display the current GEQ mode

Press GEQ. The current mode is displayed for 4 seconds.

To cancel the selected mode

Press GEQ, and turn MULTI JOG to select” GEQ OFF within 4

seconds. “GRAPHIC EQUALIZER disappears.

To select with the remote control

Press GEQ repeatedly while pressing SHIFT. The GEQ mode is

displayed cyclically as above.

To change the spectrum analyzer display

3 patterns of spectrum analyzer display can be shwon.

Press DISP once, and turn MULTI JOG within4 seconds to select the desired spectrum analyzer display.

SETTING A NEW EQUALIZATION CURV-E MANUALLY

The equalization curve can be customized to suit your preference.

1 Press LOW.

The lowest level frequency indicator flashes for 4 seconds.

2 Within 4 seconds, turn MULTI JOG to adjust the level of the lowest frequency.

3 Press HIGH.

The highest level frequency indicator flashes for 4 seconds.

4 Within 4 seconds, turn MULTI JOG to adjust the level of the highest frequency.

The frequency level indicators of between the lowest and the highest are adjusted accordingly.

------- : - ---- -.”-i< *.”:- = -~V?G3...=’,

MEMORIZlN6 ‘tHE ‘NE-W EQUALIZATlON

CURVES

Up to 4 customized equalization curves can be stored as the

manual modes Ml - M4.

1 Set a new equalization curve with HIGH, LOW and

MULTI JOG.

See “SETTING A NEW EQUALIZATION CURVE MANUALLY”.

The created curve is displayed for 4 seconds.

2 Within 4 seconds, press ENTER.

“M1“flashes on the display for 4 seconds.

●If this step is not completed within 4 seconds, press GEQ first to display “GEQ ON”. Then press ENTER wtihin 4 seconds.

3 Within 4 seconds, turn MULTI JOG to select one of the manual modes Ml - M4 to store the curve.

4 Within 4 seconds, press ENTER.

The new equalization curve is stored.

To select the stored equalization curve

Press GEQ, and turn MULTI JOG to select one of the manual

modes Ml - M4 within 4 seconds.

7 ENGLISH