Bbe System, Press T-BASS, DIMMER OThe normal display

vowl,~

T-BASS

SHIFT

VOLUME

The volume level is automatically set to 20 when the power is turned off with the volume level set to 21 or more.

The T-BASS system enhances the realism of low-frequency

sound.

Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference.

T-BASS

●Low frequency sound may be distorted when the T-BASS system is used for a disc or tape in which low frequency sound

is originally emphasized. In this case, cancel the T-BASS

system.

●When playing back a tape recorded with BBE, it IIS

recommended that BBE be set to off to avoid distorted high frequency sound.

BBE SYSTEM

The BBE system enhances the clarity of high-frequency sound. It also enriches the Karaoke function to make your voice sound clear and pleasant.

Press BBE.

Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference.

BBE

1Press DISP twice so that “DIMMER” is displayed,

2Within 4 seconds, turn MULTI JOG to select the dimmer mode as follows,

r DIMMER O+ DIMMER 1 + DIMMER 2+ DIMMER 3 7

DIMMER 2: The illumination of the display is dimmer than

DIMMER 1,

DIMMER 3: The illumination of the display is dimmer than DIMMER 2, and the spectrum analyzer and the illumination on the buttons light off.

Connect headphones to the PHONES jack with a standard stereo plug (@6.3 mm, ‘/, inch).

No sound is output from the speakers while the headphones are plugged in.

The output volume and tone (except BBE) of the speakers or headphones are freely varied without affecting the level of the recording.

ENGLISH 6